Solid Panel Shower Walls

9 Frequently Asked Questions About Stone Solid Surface Shower Wall within proportions 735 X 1102

Solid Panel Shower Walls – Designing and developing a glass block shower wall or window should not be brain surgery – but you can find large choice of potential sizes and patterns to choose from that could result in the task seem difficult. This article will provide specific tips and steps to ensure you get the correct size blocks for your job.

Design Tip # 1 – When to choose a 4″ x 8″ x 4″ block – Since this block may be the skinniest unit it can be used either to fill out a window opening the place where a thin block should be used or create a curved kitchen or recreation room bar. If you’re looking for a way to jazz up your selection consider sprinkling in a few frosted or colored glass blocks as well. It is usually easier to make an effort to prefabricated sections using this block as they are hard to lay using the unit by unit method because of the fact they just don’t have much surface area around the 4″ side.

Design Tip # 2 – When to choose a 6″ x 6″ x 4″ block – This unit is frequently used for either new construction or replacement windows. It looks good if it’s paired in larger commercial openings with the 12″ x 12″ x 4″ sized masonry units. It is available in many of the common patterns including Decora, Wave, Argus, Vue, Clear and Iceberg patterns. This block is hard to use with partition walls because you can find not any finishing end, corner or curved blocks that provide 6″ sizes.

Design Tip # 3 – When to choose a 6″ x 8″ x 4″ block – This unit size is often an excellent choice when you find yourself seeking to complete a shower stall or enclosure. The reason this block calculates well is because the curved glass blocks and many of the finished bull nose end units are designed inside 6″ x 8″ x 4″ size. Since this size is much less large it is packaged in handy when you find yourself developed a curved walk in shower wall and then there is not a large amount of depth for the shower base.

Design Tip # 4 – When to select the 8″ x 8″ x 4″ block – The most cost effective block to design your shower, wall or window with may be the 8 x 8 x 4 size. Since this unit utilizes a small number of units per square foot and also, since the assembly runs of the size are large their total costs per square foot usually are the most reasonable. Another reason to take into consideration this size may be the end, step down, 45 degree angle, and 90 degree corner blocks are available in this size and in multiple patterns (including Decora, Wave, Icescapes, Iceberg & Clear).

Design Tip # 5- When to use 12″ x 12″ x 4″ blocks – The 12″ x 12″ unit is used primarily for its larger size and mass. This selection is most often used in glass block window and wall in-fill projects predominately inside commercial market. Common patterns include Decora, Wave, Argus, Vue, and Clear.

Design Tip #6 – Mix up sizes, colors and frosted selections for a distinctive touch- Why be uniform when you can come out with a distinctive design of your own? Mixing the sizes together provides the touch that could come up with a project stand out. It is usually easiest to combine blocks like 6″ x 6″ with the 12″ x 12″ units or mix 4″ x 8″ blocks with 8″ x 8″ units. Another option to take into consideration may be the use of colored or frosted glass blocks – use a few of them as accents, stripes or as being a complete wall or window.

Design Tip #7 – If you’re still unsure call the experts – Sometimes it’s easiest and finest to call the block experts to design your shower, window or wall project and take any guesswork out with the process.

Now you are designed with these sizing tips you’re ready to get up on your glass block shower wall or window project.