Rock Shower Walls – Designing and constructing a glass block shower wall or window really should not be nuclear physics – but you will find wide array of sizes and patterns to choose from that will increase the risk for task seem difficult. This article will provide specific tips and steps to ensure you get the proper size blocks on your job.
Design Tip # 1 – When to choose a 4″ x 8″ x 4″ block – Since this block could be the skinniest unit it can be used either to complete a window opening in which a thin block is needed as well as to create a curved kitchen or recreation room bar. If you’re looking for ways to jazz up your selection consider sprinkling in certain frosted or colored glass blocks also. It is usually safer to try to prefabricated sections by using this block as they are difficult to lay while using unit by unit method because of the fact they just don’t have much surface for the 4″ side.
Design Tip # 2 – When to choose a 6″ x 6″ x 4″ block – This unit is often times employed for either new construction or replacement windows. It looks good when it is paired in larger commercial openings while using 12″ x 12″ x 4″ sized masonry units. It is for sale in lots of the common patterns including Decora, Wave, Argus, Vue, Clear and Iceberg patterns. This block is difficult to use with partition walls because you will find no actual finishing end, corner or curved blocks that accompany 6″ sizes.
Design Tip # 3 – When to choose a 6″ x 8″ x 4″ block – This unit size is often a great choice when you’re looking to complete a shower stall or enclosure. The reason this block calculates well happens because the curved glass blocks and lots of the finished bull nose end units are produced within the 6″ x 8″ x 4″ size. Since this size is not very large it’s available in handy when you’re created a curved walk in shower wall where there is not a lots of depth for your shower base.
Design Tip # 4 – When to select the 8″ x 8″ x 4″ block – The most cost effective block to style your shower, wall or window with could be the 8 x 8 x 4 size. Since this unit works on the small number of units per square foot and also, since the fabrication runs with this size are large their total costs per square foot are generally essentially the most reasonable. Another reason to think about this size could be the end, step down, 45 degree angle, and 90 degree corner blocks are for sale in this size along with multiple patterns (including Decora, Wave, Icescapes, Iceberg & Clear).
Design Tip # 5- When to use 12″ x 12″ x 4″ blocks – The 12″ x 12″ unit can be used primarily because of its larger size and mass. This selection is normally employed in glass block window and wall in-fill projects predominately within the commercial market. Common patterns include Decora, Wave, Argus, Vue, and Clear.
Design Tip #6 – Mix up sizes, colors and frosted selections for a unique touch- Why be uniform when you can walk out with a unique type of your own personal? Mixing the sizes together provides just the touch that will produce a project jump out. It is usually easiest to combine blocks like 6″ x 6″ while using 12″ x 12″ units as well as to mix 4″ x 8″ blocks with 8″ x 8″ units. Another option to think about could be the utilization of colored or frosted glass blocks – use a handful of them as accents, stripes or being a complete wall or window.
Design Tip #7 – If you’re still not sure call the experts – Sometimes it’s easiest and best to call the block experts to style your shower, window or wall project and take any guesswork out with the process.
Now you’re furnished with these sizing tips it is time to get going on your own glass block shower wall or window project.