Diy Shower Walls

5 Diy Shower Wall Tips And Ideas To Save Time And Money Innovate inside proportions 735 X 1102

Diy Shower Walls – Designing and creating a glass block shower wall or window shouldn’t be nuclear physics – but you’ll find large choice of potential sizes and patterns from which to choose that could result in the task seem difficult. This article will provide specific tips and steps to ensure you get the correct size blocks to your job.

Design Tip # 1 – When to pick a 4″ x 8″ x 4″ block – Since this block is the skinniest unit it really is used either to fill out a window opening in which a thin block should be used or produce a curved kitchen or recreation room bar. If you’re looking for a way to jazz up your selection consider sprinkling in most frosted or colored glass blocks as well. It is usually safer to attempt to prefabricated sections by using this block as they are hard to lay using the unit by unit method simply because they don’t really have much surface area on the 4″ side.

Design Tip # 2 – When to pick a 6″ x 6″ x 4″ block – This unit is often times employed for either new construction or replacement windows. It looks good if it is paired in larger commercial openings while using 12″ x 12″ x 4″ sized masonry units. It is available in lots of the common patterns including Decora, Wave, Argus, Vue, Clear and Iceberg patterns. This block is hard to use with partition walls because you’ll find n’t any finishing end, corner or curved blocks that provide 6″ sizes.

Design Tip # 3 – When to pick a 6″ x 8″ x 4″ block – This unit dimensions are often a great choice when you are trying to complete a shower stall or enclosure. The reason this block breaks down to well is because the curved glass blocks and lots of the finished bull nose end units are designed inside the 6″ x 8″ x 4″ size. Since this dimensions are not very large it comes in handy when you are created a curved walk in shower wall and then there is not a lots of depth to the shower base.

Design Tip # 4 – When to choose the 8″ x 8″ x 4″ block – The most cost effective block to style your shower, wall or window with is the 8 x 8 x 4 size. Since this unit uses a small number of units per square foot and because the production runs on this size are large their total costs per square foot tend to be the most reasonable. Another reason to take into consideration this size is the end, step down, 45 degree angle, and 90 degree corner blocks are available in this size plus multiple patterns (including Decora, Wave, Icescapes, Iceberg & Clear).

Design Tip # 5- When to work with 12″ x 12″ x 4″ blocks – The 12″ x 12″ unit is utilized primarily due to the larger size and mass. This selection is mostly utilized in glass block window and wall in-fill projects predominately inside the commercial market. Common patterns include Decora, Wave, Argus, Vue, and Clear.

Design Tip #6 – Mix up sizes, colors and frosted choices for a unique touch- Why be uniform when you’re able to walk out with a unique design of your own personal? Mixing the sizes together provides exactly the touch that could make a project be noticeable. It is usually easiest to mix blocks like 6″ x 6″ while using 12″ x 12″ units or mix 4″ x 8″ blocks with 8″ x 8″ units. Another option to take into consideration is the usage of colored or frosted glass blocks – work with a couple of them as accents, stripes or like a complete wall or window.

Design Tip #7 – If you’re still uncertain call experts – Sometimes it’s easiest and greatest to call the block experts to style your shower, window or wall project and take any guesswork out of the process.

Now you’re built with these sizing tips you need to get up on the glass block shower wall or window project.