Splashback Shower Walls

Acrylic Shower Splashback Walls Painted In A Soft Grey Colour intended for proportions 2848 X 4288

Splashback Shower Walls – Designing and constructing a glass block shower wall or window mustn’t be too difficult – but you’ll find range of sizes and patterns to pick from that may result in the task seem difficult. This article will provide specific tips and steps to ensure you get the correct size blocks for the job.

Design Tip # 1 – When to pick a 4″ x 8″ x 4″ block – Since this block could be the skinniest unit it is used either to add a window opening where a thin block is required as well as to build a curved kitchen or recreation room bar. If you’re looking for a method to jazz up your selection consider sprinkling in certain frosted or colored glass blocks too. It is usually safer to make an effort to prefabricated sections applying this block as they are challenging to lay while using the unit by unit method simply because they don’t really have much area about the 4″ side.

Design Tip # 2 – When to pick a 6″ x 6″ x 4″ block – This unit is frequently employed for either new construction or replacement windows. It looks good if it is paired in larger commercial openings using the 12″ x 12″ x 4″ sized masonry units. It is accessible in many of the common patterns including Decora, Wave, Argus, Vue, Clear and Iceberg patterns. This block is challenging to use with partition walls because you’ll find n’t any finishing end, corner or curved blocks that accompany 6″ sizes.

Design Tip # 3 – When to pick a 6″ x 8″ x 4″ block – This unit dimension is often an excellent choice if you are trying to complete a shower stall or enclosure. The reason this block computes well is simply because the curved glass blocks and many of the finished bull nose end units are designed inside the 6″ x 8″ x 4″ size. Since this dimension is not very large it’s available in handy if you are created curved walk in shower wall where there is not a lots of depth for that shower base.

Design Tip # 4 – When to select the 8″ x 8″ x 4″ block – The most cost effective block to style your shower, wall or window with could be the 8 x 8 x 4 size. Since this unit uses a small number of units per square foot also, since the development runs with this size are large their total costs per square foot tend to be essentially the most reasonable. Another reason to think about this size could be the end, step down, 45 degree angle, and 90 degree corner blocks are accessible in this size as well as in multiple patterns (including Decora, Wave, Icescapes, Iceberg & Clear).

Design Tip # 5- When to make use of 12″ x 12″ x 4″ blocks – The 12″ x 12″ unit is utilized primarily for its larger size and mass. This selection is most often found in glass block window and wall in-fill projects predominately inside the commercial market. Common patterns include Decora, Wave, Argus, Vue, and Clear.

Design Tip #6 – Mix up sizes, colors and frosted choices for a distinctive touch- Why be uniform when it’s possible to step out with a distinctive style of your own? Mixing the sizes together provides the touch that may make a project jump out. It is usually easiest to combine blocks like 6″ x 6″ using the 12″ x 12″ units as well as to mix 4″ x 8″ blocks with 8″ x 8″ units. Another option to think about could be the using colored or frosted glass blocks – use a handful of them as accents, stripes or as being a complete wall or window.

Design Tip #7 – If you’re still not sure call experts – Sometimes it’s easiest and greatest to call the block experts to style your shower, window or wall project and take any guesswork out with the process.

Now you are equipped with these sizing tips you’re ready get going on your glass block shower wall or window project.