Handheld Shower Wall Mount

Delta Temp2o 6 Spray Hand Shower With Wall Mount In Chrome 55446 throughout dimensions 1000 X 1000

Handheld Shower Wall Mount – Designing and developing a glass block shower wall or window mustn’t be nuclear physics – but you’ll find huge selection of sizes and patterns from which to choose that could result in the task seem difficult. This article will provide specific tips and steps to ensure you get the correct size blocks to your job.

Design Tip # 1 – When to choose a 4″ x 8″ x 4″ block – Since this block may be the skinniest unit it is used either to fill in a window opening in which a thin block is required in order to develop a curved kitchen or recreation room bar. If you’re looking for ways to jazz up your selection consider sprinkling in certain frosted or colored glass blocks as well. It is usually easier to attempt to prefabricated sections employing this block since they’re difficult to lay using the unit by unit method due to the fact they do not have much floor for the 4″ side.

Design Tip # 2 – When to choose a 6″ x 6″ x 4″ block – This unit is most often employed for either new construction or replacement windows. It looks good when it is paired in larger commercial openings while using 12″ x 12″ x 4″ sized masonry units. It is accessible in most of the common patterns including Decora, Wave, Argus, Vue, Clear and Iceberg patterns. This block is difficult to use with partition walls because you’ll find n’t any finishing end, corner or curved blocks that accompany 6″ sizes.

Design Tip # 3 – When to choose a 6″ x 8″ x 4″ block – This unit size is often a great choice when you are seeking to develop a shower stall or enclosure. The reason this block calculates well is simply because the curved glass blocks and most of the finished bull nose end units are designed inside 6″ x 8″ x 4″ size. Since this size is much less large it is packaged in handy when you are developed a curved walk in shower wall and then there is not a lot of depth for your shower base.

Design Tip # 4 – When to pick the 8″ x 8″ x 4″ block – The most cost effective block to style your shower, wall or window with may be the 8 x 8 x 4 size. Since this unit runs on the small number of units per square foot also, since the assembly runs of this size are large their total costs per square foot tend to be one of the most reasonable. Another reason to consider this size may be the end, step down, 45 degree angle, and 90 degree corner blocks are accessible in this size as well as in multiple patterns (including Decora, Wave, Icescapes, Iceberg & Clear).

Design Tip # 5- When to use 12″ x 12″ x 4″ blocks – The 12″ x 12″ unit is employed primarily because of its larger size and mass. This selection is most often employed in glass block window and wall in-fill projects predominately inside commercial market. Common patterns include Decora, Wave, Argus, Vue, and Clear.

Design Tip #6 – Mix up sizes, colors and frosted selections for an original touch- Why be uniform when you can go out with an original style of your own personal? Mixing the sizes together provides only the touch that could make a project be noticeable. It is usually easiest to mix blocks like 6″ x 6″ while using 12″ x 12″ units in order to mix 4″ x 8″ blocks with 8″ x 8″ units. Another option to consider may be the utilization of colored or frosted glass blocks – make use of a handful of them as accents, stripes or as a complete wall or window.

Design Tip #7 – If you’re still uncertain call the pros – Sometimes it’s easiest and greatest to call the block experts to style your shower, window or wall project and take any guesswork out of the process.

Now you are equipped with these sizing tips you’re ready get going in your glass block shower wall or window project.