Tile Look Shower Walls

Shower Surrounds That Look Like Tile Your Standard Hall Shower Can for measurements 1280 X 1706

Tile Look Shower Walls – Designing and constructing a glass block shower wall or window really should not be rocket science – but there are range of sizes and patterns to select from that may make task seem difficult. This article will provide specific tips and steps to ensure you get the proper size blocks for your job.

Design Tip # 1 – When to pick a 4″ x 8″ x 4″ block – Since this block is the skinniest unit it really is used either to complete a window opening in which a thin block should be used or develop a curved kitchen or recreation room bar. If you’re looking for a means to jazz up your selection consider sprinkling in some frosted or colored glass blocks as well. It is usually safer to try to prefabricated sections applying this block as they are tough to lay with all the unit by unit method mainly because they just don’t have much surface around the 4″ side.

Design Tip # 2 – When to pick a 6″ x 6″ x 4″ block – This unit is often times employed for either new construction or replacement windows. It looks good when it is paired in larger commercial openings with the 12″ x 12″ x 4″ sized masonry units. It is accessible in a lot of the common patterns including Decora, Wave, Argus, Vue, Clear and Iceberg patterns. This block is tough to use with partition walls because there are no finishing end, corner or curved blocks that provide 6″ sizes.

Design Tip # 3 – When to pick a 6″ x 8″ x 4″ block – This unit dimensions are often a fantastic choice when you are aiming to complete a shower stall or enclosure. The reason this block computes well happens because the curved glass blocks and a lot of the finished bull nose end units are produced in the 6″ x 8″ x 4″ size. Since this dimensions are less than large it is packaged in handy when you are designed a curved walk in shower wall its keep is not a large amount of depth for the shower base.

Design Tip # 4 – When to select the 8″ x 8″ x 4″ block – The most cost effective block to design your shower, wall or window with is the 8 x 8 x 4 size. Since this unit uses a small number of units per square foot and because the fabrication runs of this size are large their total costs per square foot usually are probably the most reasonable. Another reason to take into consideration this size is the end, step down, 45 degree angle, and 90 degree corner blocks are accessible in this size as well as in multiple patterns (including Decora, Wave, Icescapes, Iceberg & Clear).

Design Tip # 5- When to work with 12″ x 12″ x 4″ blocks – The 12″ x 12″ unit is used primarily because of its larger size and mass. This selection is normally found in glass block window and wall in-fill projects predominately in the commercial market. Common patterns include Decora, Wave, Argus, Vue, and Clear.

Design Tip #6 – Mix up sizes, colors and frosted options for a distinctive touch- Why be uniform when you can come out with a distinctive type of your personal? Mixing the sizes together provides the touch that may produce a project be noticeable. It is usually easiest to mix blocks like 6″ x 6″ with the 12″ x 12″ units or mix 4″ x 8″ blocks with 8″ x 8″ units. Another option to take into consideration is the utilization of colored or frosted glass blocks – work with a few of them as accents, stripes or like a complete wall or window.

Design Tip #7 – If you’re still unclear call professionals – Sometimes it’s easiest as well as to call the block experts to design your shower, window or wall project and take any guesswork out of the process.

Now you are furnished with these sizing tips you’re ready to get going on the glass block shower wall or window project.