Bathtub Shower Walls

Tub Shower Walls American Standard with regard to size 2000 X 2000

Bathtub Shower Walls – Designing and constructing a glass block shower wall or window really should not be nuclear physics – but you can find large choice of potential sizes and patterns to choose from that may make task seem difficult. This article will provide specific tips and steps to ensure you get the right size blocks on your job.

Design Tip # 1 – When to select a 4″ x 8″ x 4″ block – Since this block is the skinniest unit it’s used either to fill out a window opening the place where a thin block is required in order to produce a curved kitchen or recreation room bar. If you’re looking for a method to jazz up your selection consider sprinkling in most frosted or colored glass blocks as well. It is usually better to try to prefabricated sections applying this block because they are difficult to lay while using the unit by unit method due to the fact they do not have much surface around the 4″ side.

Design Tip # 2 – When to select a 6″ x 6″ x 4″ block – This unit is most often employed for either new construction or replacement windows. It looks good if it’s paired in larger commercial openings while using 12″ x 12″ x 4″ sized masonry units. It is available in a lot of the common patterns including Decora, Wave, Argus, Vue, Clear and Iceberg patterns. This block is difficult to use with partition walls because you can find not any finishing end, corner or curved blocks that accompany 6″ sizes.

Design Tip # 3 – When to select a 6″ x 8″ x 4″ block – This unit size is often an excellent choice when you are looking to develop a shower stall or enclosure. The reason this block breaks down to well is simply because the curved glass blocks and a lot of the finished bull nose end units are designed in the 6″ x 8″ x 4″ size. Since this size is not too large it comes in handy when you are created curved walk in shower wall high is not a lot of depth for the shower base.

Design Tip # 4 – When to choose the 8″ x 8″ x 4″ block – The most cost effective block to create your shower, wall or window with is the 8 x 8 x 4 size. Since this unit utilizes a small number of units per square foot and also, since the development runs on this size are large their total costs per square foot usually are one of the most reasonable. Another reason to consider this size is the end, step down, 45 degree angle, and 90 degree corner blocks are available in this size as well as in multiple patterns (including Decora, Wave, Icescapes, Iceberg & Clear).

Design Tip # 5- When to utilize 12″ x 12″ x 4″ blocks – The 12″ x 12″ unit is employed primarily because of its larger size and mass. This selection is mostly used in glass block window and wall in-fill projects predominately in the commercial market. Common patterns include Decora, Wave, Argus, Vue, and Clear.

Design Tip #6 – Mix up sizes, colors and frosted choices for an exceptional touch- Why be uniform when you are able go out with an exceptional style of your individual? Mixing the sizes together provides exactly the touch that may come up with a project jump out. It is usually easiest to blend blocks like 6″ x 6″ while using 12″ x 12″ units in order to mix 4″ x 8″ blocks with 8″ x 8″ units. Another option to consider is the use of colored or frosted glass blocks – utilize a number of them as accents, stripes or like a complete wall or window.

Design Tip #7 – If you’re still not sure call the pros – Sometimes it’s easiest and finest to call the block experts to create your shower, window or wall project and take any guesswork out with the process.

Now that you are designed with these sizing tips you’re ready get moving in your glass block shower wall or window project.