Epoxy Shower Wall

Shower Walls Built From Epoxy Poured Over Panels Bathroom In 2019 for sizing 1828 X 2411

Epoxy Shower Wall – Designing and constructing a glass block shower wall or window should not be too difficult – but you can find range of sizes and patterns to select from that could make the task seem difficult. This article will provide specific tips and steps to ensure you get the right size blocks to your job.

Design Tip # 1 – When to choose a 4″ x 8″ x 4″ block – Since this block is the skinniest unit it’s used either to fill out a window opening in which a thin block is necessary in order to create a curved kitchen or recreation room bar. If you’re looking for a method to jazz up your selection consider sprinkling in some frosted or colored glass blocks also. It is usually better to try and prefabricated sections employing this block since they’re difficult to lay while using the unit by unit method due to the fact they don’t really have much area about the 4″ side.

Design Tip # 2 – When to choose a 6″ x 6″ x 4″ block – This unit is often times employed for either new construction or replacement windows. It looks good when it is paired in larger commercial openings with the 12″ x 12″ x 4″ sized masonry units. It is accessible in a lot of the common patterns including Decora, Wave, Argus, Vue, Clear and Iceberg patterns. This block is difficult to use with partition walls because you can find not any finishing end, corner or curved blocks that accompanies 6″ sizes.

Design Tip # 3 – When to choose a 6″ x 8″ x 4″ block – This unit size is often a fantastic choice when you’re looking to finish a shower stall or enclosure. The reason this block breaks down to well is really because the curved glass blocks and a lot of the finished bull nose end units are made in the 6″ x 8″ x 4″ size. Since this size is not very large it comes in handy when you’re developed a curved walk in shower wall where there is not a lot of depth for that shower base.

Design Tip # 4 – When to choose the 8″ x 8″ x 4″ block – The most cost effective block to create your shower, wall or window with is the 8 x 8 x 4 size. Since this unit utilizes a small number of units per square foot and also, since the assembly runs of this size are large their total costs per square foot tend to be probably the most reasonable. Another reason to take into consideration this size is the end, step down, 45 degree angle, and 90 degree corner blocks are accessible in this size as well as in multiple patterns (including Decora, Wave, Icescapes, Iceberg & Clear).

Design Tip # 5- When to utilize 12″ x 12″ x 4″ blocks – The 12″ x 12″ unit is used primarily because of its larger size and mass. This selection is mostly used in glass block window and wall in-fill projects predominately in the commercial market. Common patterns include Decora, Wave, Argus, Vue, and Clear.

Design Tip #6 – Mix up sizes, colors and frosted options for an original touch- Why be uniform when it’s possible to come out with an original design of your own personal? Mixing the sizes together provides just the touch that could produce a project stick out. It is usually easiest to combine blocks like 6″ x 6″ with the 12″ x 12″ units in order to mix 4″ x 8″ blocks with 8″ x 8″ units. Another option to take into consideration is the use of colored or frosted glass blocks – make use of a couple of them as accents, stripes or like a complete wall or window.

Design Tip #7 – If you’re still unsure call professionals – Sometimes it’s easiest and finest to call the block experts to create your shower, window or wall project and take any guesswork out in the process.

Now you are designed with these sizing tips it is time to get up on your own glass block shower wall or window project.