Stainless Steel Shower Wall Panels

Getting Closer On The Shower Built Friends Evan Gabs pertaining to proportions 2736 X 3648

Stainless Steel Shower Wall Panels – Designing and constructing a glass block shower wall or window mustn’t be nuclear physics – but there are wide array of sizes and patterns from which to choose that will make the task seem difficult. This article will provide specific tips and steps to ensure you get the correct size blocks for your job.

Design Tip # 1 – When to select a 4″ x 8″ x 4″ block – Since this block could be the skinniest unit it’s used either to fill out a window opening when a thin block should be used as well as to create a curved kitchen or recreation room bar. If you’re looking for a means to jazz up your selection consider sprinkling in most frosted or colored glass blocks as well. It is usually preferable to attempt to prefabricated sections applying this block because they’re hard to lay using the unit by unit method because of the fact they just don’t have much surface on the 4″ side.

Design Tip # 2 – When to select a 6″ x 6″ x 4″ block – This unit is frequently used by either new construction or replacement windows. It looks good if it’s paired in larger commercial openings while using 12″ x 12″ x 4″ sized masonry units. It is available in a lot of the common patterns including Decora, Wave, Argus, Vue, Clear and Iceberg patterns. This block is hard to use with partition walls because there are no finishing end, corner or curved blocks that is included with 6″ sizes.

Design Tip # 3 – When to select a 6″ x 8″ x 4″ block – This unit dimension is often a great choice if you are trying to finish a shower stall or enclosure. The reason this block works out well is really because the curved glass blocks and a lot of the finished bull nose end units are made in the 6″ x 8″ x 4″ size. Since this dimension is less than large it comes in handy if you are designed a curved walk in shower wall where there is not a lot of depth for your shower base.

Design Tip # 4 – When to select the 8″ x 8″ x 4″ block – The most cost effective block to development your shower, wall or window with could be the 8 x 8 x 4 size. Since this unit works on the small number of units per square foot and also, since the production runs on this size are large their total costs per square foot usually are probably the most reasonable. Another reason to think about this size could be the end, step down, 45 degree angle, and 90 degree corner blocks are available in this size along with multiple patterns (including Decora, Wave, Icescapes, Iceberg & Clear).

Design Tip # 5- When to make use of 12″ x 12″ x 4″ blocks – The 12″ x 12″ unit can be used primarily due to the larger size and mass. This selection is most commonly employed in glass block window and wall in-fill projects predominately in the commercial market. Common patterns include Decora, Wave, Argus, Vue, and Clear.

Design Tip #6 – Mix up sizes, colors and frosted options for an exceptional touch- Why be uniform when you can go out with an exceptional type of your individual? Mixing the sizes together provides just the touch that will make a project be noticeable. It is usually easiest to mix blocks like 6″ x 6″ while using 12″ x 12″ units as well as to mix 4″ x 8″ blocks with 8″ x 8″ units. Another option to think about could be the using colored or frosted glass blocks – work with a few of them as accents, stripes or as a complete wall or window.

Design Tip #7 – If you’re still unclear call experts – Sometimes it’s easiest and greatest to call the block experts to development your shower, window or wall project and take any guesswork out with the process.

Now you are built with these sizing tips it is time to get going in your glass block shower wall or window project.