Porcelain Tile In Shower Walls

Grey Porcelain Tile Was Chosen For The Floor Shower Walls And Wall inside sizing 1000 X 1500

Porcelain Tile In Shower Walls – Designing and building a glass block shower wall or window really should not be nuclear physics – but you’ll find huge selection of sizes and patterns to pick from that will make task seem difficult. This article will provide specific tips and steps to ensure you get the best size blocks for the job.

Design Tip # 1 – When to go with a 4″ x 8″ x 4″ block – Since this block may be the skinniest unit it is used either to add a window opening where a thin block is needed or to build a curved kitchen or recreation room bar. If you’re looking for a way to jazz up your selection consider sprinkling in certain frosted or colored glass blocks as well. It is usually easier to try and prefabricated sections by using this block because they’re hard to lay while using the unit by unit method simply because they don’t have much area about the 4″ side.

Design Tip # 2 – When to go with a 6″ x 6″ x 4″ block – This unit is most often used for either new construction or replacement windows. It looks good when it’s paired in larger commercial openings using the 12″ x 12″ x 4″ sized masonry units. It is for sale in a lot of the common patterns including Decora, Wave, Argus, Vue, Clear and Iceberg patterns. This block is hard to use with partition walls because you’ll find n’t any finishing end, corner or curved blocks that provide 6″ sizes.

Design Tip # 3 – When to go with a 6″ x 8″ x 4″ block – This unit size is often a great choice when you are trying to develop a shower stall or enclosure. The reason this block works out well is really because the curved glass blocks and a lot of the finished bull nose end units are made within the 6″ x 8″ x 4″ size. Since this size is not very large it is made in handy when you are created curved walk in shower wall and then there is not a lots of depth to the shower base.

Design Tip # 4 – When to choose the 8″ x 8″ x 4″ block – The most cost effective block to style your shower, wall or window with may be the 8 x 8 x 4 size. Since this unit uses a small number of units per square foot and because the development runs of the size are large their total costs per square foot are generally essentially the most reasonable. Another reason to take into account this size may be the end, step down, 45 degree angle, and 90 degree corner blocks are for sale in this size plus multiple patterns (including Decora, Wave, Icescapes, Iceberg & Clear).

Design Tip # 5- When to use 12″ x 12″ x 4″ blocks – The 12″ x 12″ unit is employed primarily for its larger size and mass. This selection is normally found in glass block window and wall in-fill projects predominately within the commercial market. Common patterns include Decora, Wave, Argus, Vue, and Clear.

Design Tip #6 – Mix up sizes, colors and frosted alternatives for a unique touch- Why be uniform when it’s possible to step out with a unique design of your personal? Mixing the sizes together provides only the touch that will create a project stand out. It is usually easiest to blend blocks like 6″ x 6″ using the 12″ x 12″ units or to mix 4″ x 8″ blocks with 8″ x 8″ units. Another option to take into account may be the using colored or frosted glass blocks – work with a couple of them as accents, stripes or being a complete wall or window.

Design Tip #7 – If you’re still uncertain call experts – Sometimes it’s easiest and greatest to call the block experts to style your shower, window or wall project and take any guesswork out from the process.

Now you are furnished with these sizing tips it is time to get up in your glass block shower wall or window project.