Cut To Fit Shower Walls

Wall Panels throughout dimensions 1024 X 768

Cut To Fit Shower Walls – Designing and developing a glass block shower wall or window really should not be rocket science – but you can find huge selection of sizes and patterns to choose from that can make task seem difficult. This article will provide specific tips and steps to ensure you get the correct size blocks on your job.

Design Tip # 1 – When to pick a 4″ x 8″ x 4″ block – Since this block could be the skinniest unit it is used either to fill in a window opening the place where a thin block is required in order to develop a curved kitchen or recreation room bar. If you’re looking for a method to jazz up your selection consider sprinkling in some frosted or colored glass blocks also. It is usually easier to attempt to prefabricated sections by using this block as they are difficult to lay using the unit by unit method simply because they don’t have much area on the 4″ side.

Design Tip # 2 – When to pick a 6″ x 6″ x 4″ block – This unit is often times used by either new construction or replacement windows. It looks good when it’s paired in larger commercial openings using the 12″ x 12″ x 4″ sized masonry units. It is for sale in most of the common patterns including Decora, Wave, Argus, Vue, Clear and Iceberg patterns. This block is difficult to use with partition walls because you can find no actual finishing end, corner or curved blocks that is included with 6″ sizes.

Design Tip # 3 – When to pick a 6″ x 8″ x 4″ block – This unit size is often a fantastic choice when you’re seeking to develop a shower stall or enclosure. The reason this block calculates well is simply because the curved glass blocks and most of the finished bull nose end units are manufactured inside the 6″ x 8″ x 4″ size. Since this size is not very large it’s available in handy when you’re created a curved walk in shower wall where there is not a lots of depth for the shower base.

Design Tip # 4 – When to select the 8″ x 8″ x 4″ block – The most cost effective block to style your shower, wall or window with could be the 8 x 8 x 4 size. Since this unit utilizes a small number of units per square foot and also, since the development runs of the size are large their total costs per square foot tend to be probably the most reasonable. Another reason to consider this size could be the end, step down, 45 degree angle, and 90 degree corner blocks are for sale in this size and in multiple patterns (including Decora, Wave, Icescapes, Iceberg & Clear).

Design Tip # 5- When to utilize 12″ x 12″ x 4″ blocks – The 12″ x 12″ unit can be used primarily for the larger size and mass. This selection is normally used in glass block window and wall in-fill projects predominately inside the commercial market. Common patterns include Decora, Wave, Argus, Vue, and Clear.

Design Tip #6 – Mix up sizes, colors and frosted options for a unique touch- Why be uniform when you’re able to come out with a unique type of your own? Mixing the sizes together provides exactly the touch that can create a project stand out. It is usually easiest to mix blocks like 6″ x 6″ using the 12″ x 12″ units in order to mix 4″ x 8″ blocks with 8″ x 8″ units. Another option to consider could be the using colored or frosted glass blocks – work with a couple of them as accents, stripes or as a complete wall or window.

Design Tip #7 – If you’re still unsure call the pros – Sometimes it’s easiest and greatest to call the block experts to style your shower, window or wall project and take any guesswork out of the process.

Now that you’re designed with these sizing tips it is time to get going on your own glass block shower wall or window project.