Cultured Stone Shower Wall Panels

2013 Realistic Marble Cultured Granite Shower More Bathroom Tile with regard to size 950 X 1434

Cultured Stone Shower Wall Panels – Designing and building a glass block shower wall or window really should not be rocket science – but there are large choice of potential sizes and patterns to pick from that could result in the task seem difficult. This article will provide specific tips and steps to ensure you get the right size blocks to your job.

Design Tip # 1 – When to choose a 4″ x 8″ x 4″ block – Since this block will be the skinniest unit it’s used either to add a window opening when a thin block is needed as well as to produce a curved kitchen or recreation room bar. If you’re looking for ways to jazz up your selection consider sprinkling in most frosted or colored glass blocks as well. It is usually better to make an effort to prefabricated sections using this block because they are tough to lay with all the unit by unit method mainly because they don’t have much surface area around the 4″ side.

Design Tip # 2 – When to choose a 6″ x 6″ x 4″ block – This unit is most often used by either new construction or replacement windows. It looks good when it is paired in larger commercial openings with the 12″ x 12″ x 4″ sized masonry units. It is for sale in a lot of the common patterns including Decora, Wave, Argus, Vue, Clear and Iceberg patterns. This block is tough to use with partition walls because there are n’t any finishing end, corner or curved blocks that accompanies 6″ sizes.

Design Tip # 3 – When to choose a 6″ x 8″ x 4″ block – This unit size is often a great choice when you’re trying to finish a shower stall or enclosure. The reason this block breaks down to well happens because the curved glass blocks and a lot of the finished bull nose end units are manufactured inside the 6″ x 8″ x 4″ size. Since this size is less than large it is packaged in handy when you’re created a curved walk in shower wall where there is not a lots of depth for the shower base.

Design Tip # 4 – When to pick the 8″ x 8″ x 4″ block – The most cost effective block to development your shower, wall or window with will be the 8 x 8 x 4 size. Since this unit uses a small number of units per square foot and also, since the fabrication runs of this size are large their total costs per square foot usually are the most reasonable. Another reason to consider this size will be the end, step down, 45 degree angle, and 90 degree corner blocks are for sale in this size plus multiple patterns (including Decora, Wave, Icescapes, Iceberg & Clear).

Design Tip # 5- When to utilize 12″ x 12″ x 4″ blocks – The 12″ x 12″ unit is used primarily because of its larger size and mass. This selection is most often used in glass block window and wall in-fill projects predominately inside the commercial market. Common patterns include Decora, Wave, Argus, Vue, and Clear.

Design Tip #6 – Mix up sizes, colors and frosted options for an original touch- Why be uniform when you’re able to come out with an original style of your own personal? Mixing the sizes together provides just the touch that could produce a project be noticeable. It is usually easiest to blend blocks like 6″ x 6″ with the 12″ x 12″ units as well as to mix 4″ x 8″ blocks with 8″ x 8″ units. Another option to consider will be the utilization of colored or frosted glass blocks – make use of a number of them as accents, stripes or like a complete wall or window.

Design Tip #7 – If you’re still unsure call the pros – Sometimes it’s easiest and greatest to call the block experts to development your shower, window or wall project and take any guesswork out of the process.

Now you’re built with these sizing tips you’re ready to get up on your own glass block shower wall or window project.