Hand Held Shower Wall Mount

Lusso Luxe Wall Mounted Bath Tap With Valve And Handheld Shower Kit throughout measurements 2000 X 2000

Hand Held Shower Wall Mount – Designing and building a glass block shower wall or window really should not be nuclear physics – but there are large choice of potential sizes and patterns to select from that will make task seem difficult. This article will provide specific tips and steps to ensure you get the best size blocks on your job.

Design Tip # 1 – When to pick a 4″ x 8″ x 4″ block – Since this block is the skinniest unit it is used either to complete a window opening where a thin block is required in order to build a curved kitchen or recreation room bar. If you’re looking for a way to jazz up your selection consider sprinkling in some frosted or colored glass blocks as well. It is usually better to try to prefabricated sections applying this block because they’re tough to lay with all the unit by unit method mainly because they do not have much floor about the 4″ side.

Design Tip # 2 – When to pick a 6″ x 6″ x 4″ block – This unit is frequently used for either new construction or replacement windows. It looks good when it is paired in larger commercial openings with all the 12″ x 12″ x 4″ sized masonry units. It is available in lots of the common patterns including Decora, Wave, Argus, Vue, Clear and Iceberg patterns. This block is tough to use with partition walls because there are not any finishing end, corner or curved blocks that accompany 6″ sizes.

Design Tip # 3 – When to pick a 6″ x 8″ x 4″ block – This unit dimension is often an outstanding choice if you are looking to complete a shower stall or enclosure. The reason this block works out well is because the curved glass blocks and lots of the finished bull nose end units are made within the 6″ x 8″ x 4″ size. Since this dimension is not too large it is made in handy if you are created a curved walk in shower wall where there is not a lots of depth to the shower base.

Design Tip # 4 – When to find the 8″ x 8″ x 4″ block – The most cost effective block to create your shower, wall or window with is the 8 x 8 x 4 size. Since this unit runs on the small number of units per square foot and since the production runs of this size are large their total costs per square foot usually are one of the most reasonable. Another reason to take into account this size is the end, step down, 45 degree angle, and 90 degree corner blocks are available in this size and in multiple patterns (including Decora, Wave, Icescapes, Iceberg & Clear).

Design Tip # 5- When to work with 12″ x 12″ x 4″ blocks – The 12″ x 12″ unit can be used primarily for its larger size and mass. This selection is mostly found in glass block window and wall in-fill projects predominately within the commercial market. Common patterns include Decora, Wave, Argus, Vue, and Clear.

Design Tip #6 – Mix up sizes, colors and frosted choices for an original touch- Why be uniform when you’re able to go out with an original kind of your own personal? Mixing the sizes together provides just the touch that will come up with a project stand out. It is usually easiest to combine blocks like 6″ x 6″ with all the 12″ x 12″ units in order to mix 4″ x 8″ blocks with 8″ x 8″ units. Another option to take into account is the using colored or frosted glass blocks – utilize a few of them as accents, stripes or as a complete wall or window.

Design Tip #7 – If you’re still uncertain call the pros – Sometimes it’s easiest as well as to call the block experts to create your shower, window or wall project and take any guesswork out in the process.

Now you are equipped with these sizing tips you’re ready to get going on your glass block shower wall or window project.