Granite Slabs For Shower Walls

This Is A Full Slab Of Granite As The Back Wall For A Custom Shower throughout proportions 1224 X 1224

Granite Slabs For Shower Walls – Designing and creating a glass block shower wall or window really should not be brain surgery – but you will find wide array of sizes and patterns to choose from that could make task seem difficult. This article will provide specific tips and steps to ensure you get the right size blocks for the job.

Design Tip # 1 – When to choose a 4″ x 8″ x 4″ block – Since this block may be the skinniest unit it is used either to add a window opening in which a thin block is required or produce a curved kitchen or recreation room bar. If you’re looking for a means to jazz up your selection consider sprinkling in most frosted or colored glass blocks also. It is usually safer to try to prefabricated sections using this block because they are tough to lay while using the unit by unit method due to the fact they just don’t have much surface for the 4″ side.

Design Tip # 2 – When to choose a 6″ x 6″ x 4″ block – This unit is frequently employed for either new construction or replacement windows. It looks good when it’s paired in larger commercial openings while using 12″ x 12″ x 4″ sized masonry units. It is obtainable in many of the common patterns including Decora, Wave, Argus, Vue, Clear and Iceberg patterns. This block is tough to use with partition walls because you will find no actual finishing end, corner or curved blocks that is included with 6″ sizes.

Design Tip # 3 – When to choose a 6″ x 8″ x 4″ block – This unit size is often an outstanding choice if you are trying to complete a shower stall or enclosure. The reason this block calculates well is simply because the curved glass blocks and many of the finished bull nose end units are made in the 6″ x 8″ x 4″ size. Since this size is much less large it comes in handy if you are designed a curved walk in shower wall its keep is not a lots of depth for the shower base.

Design Tip # 4 – When to choose the 8″ x 8″ x 4″ block – The most cost effective block to design your shower, wall or window with may be the 8 x 8 x 4 size. Since this unit uses a small number of units per square foot and also, since the production runs of this size are large their total costs per square foot usually are essentially the most reasonable. Another reason to think about this size may be the end, step down, 45 degree angle, and 90 degree corner blocks are obtainable in this size and in multiple patterns (including Decora, Wave, Icescapes, Iceberg & Clear).

Design Tip # 5- When to work with 12″ x 12″ x 4″ blocks – The 12″ x 12″ unit is used primarily for the larger size and mass. This selection is most commonly found in glass block window and wall in-fill projects predominately in the commercial market. Common patterns include Decora, Wave, Argus, Vue, and Clear.

Design Tip #6 – Mix up sizes, colors and frosted alternatives for a distinctive touch- Why be uniform when you’re able to come out with a distinctive design of your individual? Mixing the sizes together provides exactly the touch that could come up with a project be noticeable. It is usually easiest to blend blocks like 6″ x 6″ while using 12″ x 12″ units or mix 4″ x 8″ blocks with 8″ x 8″ units. Another option to think about may be the use of colored or frosted glass blocks – work with a couple of them as accents, stripes or as a complete wall or window.

Design Tip #7 – If you’re still uncertain call the pros – Sometimes it’s easiest and best to call the block experts to design your shower, window or wall project and take any guesswork out with the process.

Now that you’re equipped with these sizing tips it is time to get moving on the glass block shower wall or window project.