Tile Shower Wall Inserts

Shower Niche Recessed Wall Niche Dk Liner regarding dimensions 1000 X 1500

Tile Shower Wall Inserts – Designing and developing a glass block shower wall or window should not be rocket science – but you’ll find wide array of sizes and patterns from which to choose that can result in the task seem difficult. This article will provide specific tips and steps to ensure you get the best size blocks on your job.

Design Tip # 1 – When to go with a 4″ x 8″ x 4″ block – Since this block is the skinniest unit it is used either to fill in a window opening where a thin block is required as well as to develop a curved kitchen or recreation room bar. If you’re looking for a way to jazz up your selection consider sprinkling in some frosted or colored glass blocks too. It is usually better to attempt to prefabricated sections applying this block because they’re challenging to lay while using the unit by unit method due to the fact they just don’t have much floor around the 4″ side.

Design Tip # 2 – When to go with a 6″ x 6″ x 4″ block – This unit is frequently used by either new construction or replacement windows. It looks good if it is paired in larger commercial openings with all the 12″ x 12″ x 4″ sized masonry units. It is accessible in most of the common patterns including Decora, Wave, Argus, Vue, Clear and Iceberg patterns. This block is challenging to use with partition walls because you’ll find no actual finishing end, corner or curved blocks that accompany 6″ sizes.

Design Tip # 3 – When to go with a 6″ x 8″ x 4″ block – This unit dimension is often a fantastic choice when you’re looking to finish a shower stall or enclosure. The reason this block calculates well is because the curved glass blocks and most of the finished bull nose end units are manufactured in the 6″ x 8″ x 4″ size. Since this dimension is not very large it’s available in handy when you’re designed a curved walk in shower wall where there is not a great deal of depth for that shower base.

Design Tip # 4 – When to select the 8″ x 8″ x 4″ block – The most cost effective block to design your shower, wall or window with is the 8 x 8 x 4 size. Since this unit works on the small number of units per square foot also, since the development runs on this size are large their total costs per square foot are usually one of the most reasonable. Another reason to think about this size is the end, step down, 45 degree angle, and 90 degree corner blocks are accessible in this size and in multiple patterns (including Decora, Wave, Icescapes, Iceberg & Clear).

Design Tip # 5- When to use 12″ x 12″ x 4″ blocks – The 12″ x 12″ unit is employed primarily due to the larger size and mass. This selection is mostly found in glass block window and wall in-fill projects predominately in the commercial market. Common patterns include Decora, Wave, Argus, Vue, and Clear.

Design Tip #6 – Mix up sizes, colors and frosted options for a distinctive touch- Why be uniform when you are able step out with a distinctive type of your own? Mixing the sizes together provides only the touch that can produce a project stick out. It is usually easiest to combine blocks like 6″ x 6″ with all the 12″ x 12″ units as well as to mix 4″ x 8″ blocks with 8″ x 8″ units. Another option to think about is the use of colored or frosted glass blocks – work with a number of them as accents, stripes or like a complete wall or window.

Design Tip #7 – If you’re still not sure call the experts – Sometimes it’s easiest as well as to call the block experts to design your shower, window or wall project and take any guesswork out of the process.

Now that you’re built with these sizing tips you need to get moving on the glass block shower wall or window project.