Glass Panel Shower Walls

2019 Shower Glass Panel Costs Glass Shower Wall Panels throughout measurements 1000 X 1274

Glass Panel Shower Walls – Designing and creating a glass block shower wall or window mustn’t be too difficult – but there are wide array of sizes and patterns to pick from that will make the task seem difficult. This article will provide specific tips and steps to ensure you get the proper size blocks to your job.

Design Tip # 1 – When to choose a 4″ x 8″ x 4″ block – Since this block will be the skinniest unit it is used either to add a window opening when a thin block is needed or produce a curved kitchen or recreation room bar. If you’re looking for ways to jazz up your selection consider sprinkling in certain frosted or colored glass blocks as well. It is usually safer to try to prefabricated sections by using this block because they are tough to lay while using unit by unit method mainly because they just don’t have much floor on the 4″ side.

Design Tip # 2 – When to choose a 6″ x 6″ x 4″ block – This unit is most often useful for either new construction or replacement windows. It looks good if it’s paired in larger commercial openings using the 12″ x 12″ x 4″ sized masonry units. It is accessible in lots of the common patterns including Decora, Wave, Argus, Vue, Clear and Iceberg patterns. This block is tough to use with partition walls because there are n’t any finishing end, corner or curved blocks that accompany 6″ sizes.

Design Tip # 3 – When to choose a 6″ x 8″ x 4″ block – This unit size is often a fantastic choice when you’re aiming to finish a shower stall or enclosure. The reason this block works out well is really because the curved glass blocks and lots of the finished bull nose end units are designed inside the 6″ x 8″ x 4″ size. Since this size is not too large it is packaged in handy when you’re designed a curved walk in shower wall where there is not a large amount of depth for that shower base.

Design Tip # 4 – When to select the 8″ x 8″ x 4″ block – The most cost effective block to style your shower, wall or window with will be the 8 x 8 x 4 size. Since this unit uses a small number of units per square foot and because the development runs on this size are large their total costs per square foot usually are probably the most reasonable. Another reason to consider this size will be the end, step down, 45 degree angle, and 90 degree corner blocks are accessible in this size as well as in multiple patterns (including Decora, Wave, Icescapes, Iceberg & Clear).

Design Tip # 5- When to make use of 12″ x 12″ x 4″ blocks – The 12″ x 12″ unit can be used primarily because of its larger size and mass. This selection is normally utilized in glass block window and wall in-fill projects predominately inside the commercial market. Common patterns include Decora, Wave, Argus, Vue, and Clear.

Design Tip #6 – Mix up sizes, colors and frosted choices for a unique touch- Why be uniform when it’s possible to walk out with a unique style of your own personal? Mixing the sizes together provides exactly the touch that will produce a project stick out. It is usually easiest to combine blocks like 6″ x 6″ using the 12″ x 12″ units or mix 4″ x 8″ blocks with 8″ x 8″ units. Another option to consider will be the using colored or frosted glass blocks – make use of a handful of them as accents, stripes or as a complete wall or window.

Design Tip #7 – If you’re still uncertain call experts – Sometimes it’s easiest and greatest to call the block experts to style your shower, window or wall project and take any guesswork out of the process.

Now you’re furnished with these sizing tips it is time to get going on your own glass block shower wall or window project.