Splashback For Shower Walls

Acrylic Shower Splashback Walls Painted In A Soft Grey Colour with measurements 2848 X 4288

Splashback For Shower Walls – Designing and developing a glass block shower wall or window really should not be brain surgery – but you’ll find huge selection of sizes and patterns to pick from that will make task seem difficult. This article will provide specific tips and steps to ensure you get the proper size blocks for your job.

Design Tip # 1 – When to go with a 4″ x 8″ x 4″ block – Since this block may be the skinniest unit it’s used either to fill in a window opening the place where a thin block is required or to build a curved kitchen or recreation room bar. If you’re looking for a method to jazz up your selection consider sprinkling in certain frosted or colored glass blocks as well. It is usually safer to try and prefabricated sections by using this block because they are hard to lay using the unit by unit method mainly because they do not have much area around the 4″ side.

Design Tip # 2 – When to go with a 6″ x 6″ x 4″ block – This unit is often times used for either new construction or replacement windows. It looks good if it is paired in larger commercial openings while using 12″ x 12″ x 4″ sized masonry units. It is accessible in most of the common patterns including Decora, Wave, Argus, Vue, Clear and Iceberg patterns. This block is hard to use with partition walls because you’ll find no finishing end, corner or curved blocks that provide 6″ sizes.

Design Tip # 3 – When to go with a 6″ x 8″ x 4″ block – This unit size is often a fantastic choice when you are seeking to complete a shower stall or enclosure. The reason this block computes well is because the curved glass blocks and most of the finished bull nose end units are produced inside the 6″ x 8″ x 4″ size. Since this size is not too large it is made in handy when you are designed a curved walk in shower wall where there is not a large amount of depth to the shower base.

Design Tip # 4 – When to select the 8″ x 8″ x 4″ block – The most cost effective block to create your shower, wall or window with may be the 8 x 8 x 4 size. Since this unit utilizes a small number of units per square foot and also, since the production runs with this size are large their total costs per square foot are usually one of the most reasonable. Another reason to take into account this size may be the end, step down, 45 degree angle, and 90 degree corner blocks are accessible in this size as well as in multiple patterns (including Decora, Wave, Icescapes, Iceberg & Clear).

Design Tip # 5- When to make use of 12″ x 12″ x 4″ blocks – The 12″ x 12″ unit can be used primarily for its larger size and mass. This selection is mostly employed in glass block window and wall in-fill projects predominately inside the commercial market. Common patterns include Decora, Wave, Argus, Vue, and Clear.

Design Tip #6 – Mix up sizes, colors and frosted selections for an original touch- Why be uniform when you are able step out with an original style of your personal? Mixing the sizes together provides exactly the touch that will make a project be noticeable. It is usually easiest to combine blocks like 6″ x 6″ while using 12″ x 12″ units or to mix 4″ x 8″ blocks with 8″ x 8″ units. Another option to take into account may be the utilization of colored or frosted glass blocks – make use of a handful of them as accents, stripes or being a complete wall or window.

Design Tip #7 – If you’re still unclear call professionals – Sometimes it’s easiest and best to call the block experts to create your shower, window or wall project and take any guesswork out of the process.

Now you are furnished with these sizing tips you need to get moving in your glass block shower wall or window project.