Hand Held Shower Wall Mount Bracket

Grohe Rainshower Wall Mount Hand Shower Holder In Starlight Chrome intended for size 1000 X 1000

Hand Held Shower Wall Mount Bracket – Choosing the best shower or bathtub wall surround can be tough. Should you install acrylic, a great surface material like Swanstone, or use decorative tiles? Will the standard of the products stand quality of your energy? Which one is the foremost match on your budget and tastes? Learn 7 practical steps to determine which wall system is good for you.

Step 1 – Determine if you’d like to review your existing walls – To save money it’s nice to position a bathtub or shower wall surround over a current surface. It is possible to use specialized glue or butyl tape to adhere acrylic or Swanstone solid surface materials over existing tile so long as the present walls are certainly not spongy or bowed. If you have a plastic or fiberglass system it is not possible to position new walls over your existing materials. In these cases the present system will likely need to removed, new backerboard installed after which new walls set up.

Step 2 – Think through your budget- If you’re similar to most you wish to obtain the most value on your money – a high quality material which won’t hurt you wallet. If you are considering an easy to scrub economical material acrylic is an excellent choice. It is warm to the touch, installs quickly and includes a lifetime warranty.

For a far more elegant appearance (that’s for sale in more decorative patterns and designs) consider a Swanstone solid surface wall. Swanstone is not hard to keep, doesn’t have joints to grout or seal and comes in lots of choices. Usually the priciest method is tile (unless you are able to set it up yourself and save the labor hours- tile is regarded as the time-consuming to setup vs. sheet products like acrylic & Swanstone). There are limitless choices and price ranges of tile and it creates a sophisticated look also.

Step 3 – Select your material, designs, colors and accents you would like – After you’ve selected between acrylic, Swanstone and tile you’re ready choose your design and color(s). Acrylic wall surrounds are available in many colors, patterns and finishes. There are solid, granite, metallic plus marble finishes. In addition the walls you decide on could be smooth, 4″ x 4″ simulated tiles, 8″ x 10″ simulated tiles or even a stone look. Acrylic is not really merely a white smooth faced wall.

Swanstone, as it may be famous for it’s strength, color and texture consistent, grout-free quality, along with the fact it’s not going to crack or craze – includes a very broad range of decorative options also. There are over 45 standard, high gloss, and granite colors. In addition there are decorative panels to create unique architectural designs named Pebble, Geometric, Beadboard, Tangier and Barcelona. There are also designer trim pieces and rosettes to create a finished look. Tile provides widest product options regarding color, accents, borders, sizes and thicknesses. Make sure to look for a high density water-resistant tile on your bath or shower.

Step 4 -Choose your backerboard. Select material to adhere the wall material plus true of tile finish the eye with the wall- What you can’t locate in a very bathtub or shower wall panel project can be as essential as that which you do see. Use the right material(s) behind the wall. Here are some recommendations: Acrylic – If the tile walls have been in good shape install over them by adhering the acrylic with butyl tape and color match sealant. This will save money on landfill costs, lessen the project installation some time and save money. If the existing wall can not be installed over set up moisture resistant green board or perhaps a cement backer board. Swanstone – Like acrylic when the tile is within good structural shape install within the existing. If not, Swanstone could be installed over greenboard or perhaps a cement board using special glue.

Tile – Poorly done tile installations have caused a great deal of wasted money historically (cheap backer board may have been used, poor grouting jobs, poor operate in the corners are merely a few with the problems). For tile installations never use green board – use whether water-resistant cement board or perhaps a waterproof extruded polystyrene board that way produced from Wedi Corporation. These boards must be glued and screwed in your framing. In addition to while using right backer board consider investing in a very urethane grout. This type of grout won’t should be resealed which is waterproof. Although it costs more at the start it’s going to save money later on in the should regrout, or worse yet the should redo the shower when you have any water damage.

Step 5 – Fix what’s behind the wall – The best time to correct an inadequate performing shower valve, a shower head that’s too low, or to add backer material to boost the installation of your accessories is when you’ve got the wall opened.

Step 6 – Identify the tub tub and shower accessories you wish to add function and type in your project – Have you always wanted a leg ledge for shaving, a corner seat, a curved shower rod to hold the water in, a hand held shower, a corner caddy, a frameless shower door, shampoo or soap niche or perhaps a grab bar? When you’re installing new wall surrounds is the best time for it to accessorize your bath or shower making it do the job and your family.

Step 7 – If the process sounds too difficult call a reputable contractor that is not a “one size fits all” – Let’s face it, there are a lot of choices and installation details that should be done right to make sure a successful project. Calling an expert may be higher priced in the short run but save lasting costs. Make sure to pick a contractor that doesn’t make an effort to push you in the one type of shower or bath wall surround system you can choose from (for example a company selling acrylic systems pushes this one solution you). Look for a company skilled and competent in multiple systems that may attempt to understand your preferences, budgets and tastes and offer different options.

Know you’re equipped with 7 steps that can be the good outline to plan your acrylic, Swanstone or tile bathtub or shower wall surround installation.